Industrial aluminum profiles are now widely used in automated assembly lines, electronic machinery workshops, etc., and have become an important symbol of Industry 4.0. Industrial aluminum profiles have many advantages, such as light weight, convenience, environmental protection and corrosion resistance, etc. While having these characteristics, the hardness and load-bearing of industrial aluminum profiles are not inferior to steel, which makes people curious, what is the industrial aluminum profile? produced. Industrial aluminum profiles are also called extruded aluminum profiles, so what are the aluminium extrusion machine for aluminum profiles?
1. Long rod hot shear furnace:
The long rod hot shear furnace is composed of three parts: the material rack, the furnace body and the hot shear machine. It is a device for heating, shearing and feeding raw aluminum rods to the extrusion press machine.
2. Extrusion press machine:
The aluminum extrusion machine is the main engine, which is the power device for extrusion extrusion.
3. Die heating furnace:
The function of the die heating furnace is to heat the extrusion mold.
4. Puller:
The puller has the functions of pulling, sawing, and fixing the length. The production line does not need to use the tractor, but without the tractor, 3 more workers are needed! Therefore, more than 95% of the manufacturers will be equipped.
5. Closed Hydraulic oil cooling machine
Overview: Closed Hydraulic oil cooling machine, also known as evaporative coolers, have the following advantages over open towers:
The closed cooling tower is to exchange the heat between the circulating water and the cooling water outside the tube through the heat exchange tube. The circulating water has been kept in a closed heat exchange cycle to ensure the normal and stable operation of the host equipment, and avoid the pipeline and equipment caused by the contact between the circulating water and the atmosphere. Blockage, corrosion and other failures.
6. Aluminum profile cooling bed:
The cooling bed consists of the initial stage, the sliding stage, the moving device, the feeding device, the straightening system, the material storage device, the fixed-length transmission, the finished product sawing table, and the fixed-length table. It has the functions of cooling, feeding, straightening, sawing and so on.
7. Aging furnace:
The aging furnace is composed of rails, feeding cars and furnace bodies. Used to increase profile hardness.
Post time: Aug-15-2022