Foshan Zhelu has the most advanced aluminum extrusion process in China, as a service company or solution company, we can help any aluminum plant to solve the current problems, or provide the most complete product service, we can give China's most advanced casting and extrusion process. Slag Removal Flux, Aluminum Extrusion Puller, The Detail Cast, Foshan Zhelu provides all the flux for Aluminum melting and casting.
Manufacturer of Foil For Chocolate Wrapping Wholesalers - Resistance Flexible Graphite Ring Rroduct for Aluminium billet casting – ZheLu Detail:
1.Select the hot-top casting equipment platform installation accessories of the corresponding specifications;
2.install the distribution plate, sleeve, adapter plate, distribution groove, and high-purity graphite ring on the upper side of the platform, and install the sleeve, adapter plate, and graphite ring on the mold.
On the inside, ensure clean, no damage and no gaps. It is best to use ceramic fiber paper or ceramic fiber blanket to seal the sides and bottom, which is helpful for thermal insulation.
3.After the overall hot top casting platform is installed, evenly preheat the installed standard equipment platform to 260-350 ℃, by electricity or gas. No open flame should contact the lining body of the product, Otherwise, the crack damage that occurs shall be borne by the user.
4.remove adsorbed crystal water, Make it safe and efficient use
Product detail pictures:
Related Product Guide:
We have a minimum capacity of 500KG medium frequency furnace, electric furnace, etc. for aluminum plants with small output, and there are also fixed large-scale aluminum melting roads with a capacity of 5UST to 88UST, for aluminum casting plants with larger output. Manufacturer of Foil For Chocolate Wrapping Wholesalers - Resistance Flexible Graphite Ring Rroduct for Aluminium billet casting – ZheLu , The product will supply to all over the world, such as: Kuala Lumpur, Netherlands, Leicester, Under the action of pressure, the heated aluminum rod is divided into several metal flows, enters the welding chamber through the shunt hole, collects in the welding chamber, and is welded again in the environment of high temperature, high pressure and high vacuum, and finally flows out through the gap between the mold core and the die hole, so as to form a pipe or hollow aluminum profile that meets the size and performance requirements, as an aluminum door and window profile or industrial aluminum profile. If bending is required, a bending tool is added to the rear device.