Manufactur standard Pool Type Electric Holding Furnace
Being a result of ours specialty and service consciousness, our corporation has won a very good status amid buyers all over the world for Manufactur standard Pool Type Electric Holding Furnace, We can customize the products according to your requirements and we can pack it for you when you order.
Being a result of ours specialty and service consciousness, our corporation has won a very good status amid buyers all over the world for China Holding Furnace and Pool Type, We have been seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.
Basic information of non-stick aluminum castables
This series of materials is a new type of material with low cement content and ultrafine powder combination based on high-purity mullite, andalusite and sillimanite. Due to the combination of high-purity raw materials and ultra-fine powder, this series of materials has high bulk density, high strength, and good thermal shock stability. Salt, etc.), can greatly reduce the wettability of aluminum and alloys and slag to refractory materials, and improve the corrosion resistance, erosion resistance, and non-sticking of aluminum refractory materials to aluminum liquid containing chemical components such as salt and flux. The slag and slag function prevents aluminum and alloys and slag from penetrating into the refractory material, prolonging the life of the furnace lining. Ideal for melting furnaces, static furnaces, launders, aluminum cladding linings.
2. Technical performance indicators:
| Items | GMJ-A | GMJ-AP | GMJ-GP | |
| Index | ||||
| Al2O3％ | 65 | 70 | 75 | |
| Bulk density g/cm3≥ | 2.4 | 2.65 | 2.75 | |
| Compressive strength Mpa≥ | 110℃×24h | 40 | 45 | 45 |
| 1300℃×16h | 45 | 50 | 55 | |
| Flexural strength Mpa≥ | 110℃×24h | 12 | 15 | 15 |
| 1300℃×16h | 14 | 18 | 18 | |
| line rate of change ％1300℃×3h | ±0.1 | ±0.1 | ±0.1 | |
| Application range | Furnace door, furnace door frame, slag removal slope, discharge port | |||
| Material characteristics | High strength, high wear resistance, impact resistance, peeling resistance | |||
Physical and chemical performance indicators of non-stick aluminum micro-expansion series refractory castable:
| Items | BWJ-1 | BWJ-1A | BWJ-M | BWJ-F | BWJ-G | |
| Index | ||||||
| ChemicalElement％ | Al2O3≥ | 60 | 65 | 65 | 70 | 80 |
| Fe2O3≤ | 0.6 | 0.5 | 0.4 | 0.4 | 0.3 | |
| BaO+ZnO+B2O3≥ | 3 | 3 | 3 | 4 | 4 | |
| Bulk density g/cm3≥ | 2.4 | 2.5 | 2.65 | 2.7 | 2.8 | |
| Compressive strength Mpa≥ | 110℃×24h | 35 | 40 | 40 | 45 | 45 |
| 1300℃×16h | 40 | 45 | 45 | 50 | 50 | |
| Flexural strength Mpa≥ | 110℃×24h | 5 | 10 | 10 | 12 | 14 |
| 1300℃×16h | 10 | 13 | 13 | 15 | 16 | |
| line rate of change ％1300℃×3h | 0～+0.2 | 0～+0.2 | 0～+0.2 | 0～+0.1 | 0～+0.1 | |
| Application range | Aluminum melting furnace, furnace roof, furnace wall, furnace bottom, discharge port, aluminum ladle,Launders, degassing boxes, etc. | |||||
| Material characteristics | Material characteristics integrity, high strength, corrosion resistance, peeling resistance, penetration resistance,Good thermal stability, no aluminum, no slag | |||||
Being a result of ours specialty and service consciousness, our corporation has won a very good status amid buyers all over the world for Manufactur standard Pool Type Electric Holding Furnace, We can customize the products according to your requirements and we can pack it for you when you order.
Manufactur standard China Holding Furnace and Pool Type, We have been seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.
