Material |
model |
type |
Color |
Temperature |
Density |
Technique |
Match machine |
3+7PBO/Kevlar |
ZL-KP |
Conveyor Belt |
Brown |
600℃ |
430g/m²·mm |
Needle Punch |
Below 2000T extrusion |
Kevlar |
ZL-K |
Yellow |
480℃ |
430g/m²·mm |
|||
Nomex |
ZL-N |
Off-whte |
280℃ |
430g/m²·mm |
|||
polyester |
ZL-P |
White |
180℃ |
210g/m²·mm |
Conveyor felt belts have a seamless and seamed loop design. Less likely to tear or break, allowing longer life and safe use.
Smooth and Soft:
The surface of the felt belt is uniform without undulations and unevenness. It greatly protects the aluminum profile from scratches.
High strength:
Each felt strip was punched multiple times by the needle loom under tension. So it is stable and not easy to loosen, delaminate or peel.
Resin hardening:
Resin treatment can effectively improve abrasion resistance and durability. It also helps avoid aluminum contamination sticking to the felt tape.
Sustainable:
Quite a high temperature felt belt with low elongation. It can withstand frequent rotations without deforming or avoid deforming during operation, increasing productivity.
Convenience: brand felt straps are easy to install on the beater table and are compact and lightweight. It is also easy to store when changing.
High energy absorption:
Felt straps absorb sound and absorb shock. Noise and vibration will be reduced to optimize the factory environment.
Endless and seamless attribute felt padding without joints and seams. It has no weaknesses and has a flat thickness.
The felt pad for aluminum profile is flat with no blemishes, bumps, scales. The surface is extremely smooth. Will not contaminate aluminum. Especially suitable for the production of aluminum products with extremely high requirements for electrophoretic surfaces and polished surfaces.
The high temperature felt material is 100% pure, without any impurities, the higher the purity, the higher the quality, the heat-resistant temperature meets the requirements, the abrasion resistance, and the effective use time is longer than other
manufacturers.
Below 2000T aluminum extrusion machine of an aluminum handling system(Level 3 and Level 4 )
PBO Fiber, Kevlar Fiber, Nomex fiber, Polyester Fiber.
Carding→Weaving Laying→Hardened→Cutting→Inspection