Aluminum Dross Ash Separator for Aluminum Dross Recovery

Aluminum hot Dross recycling machine, the equipment is separated according to the different physical properties and specific gravity of solid-phase objects and liquid-phase objects. The high-temperature aluminum ash released from the furnace contains a certain proportion of metal aluminum, which is added to the separator through the feeding trolley. There is a stirring device with adjustable height in the machine. After stirring, the mixed liquid metal aluminum gradually tends to the bottom of the ash pot to form a molten pool. Then it remains in the upper part of the molten pool. Under the action of stirring, the ash is discharged from the ash discharge hole in the middle and lower part of the container, and the molten aluminum is discharged from the discharge hole at the bottom of the container and directly cast into an aluminum ingot. During the stirring process, aluminum is burned and oxidized to form smoke and pollute the environment. A smoke exhaust device is installed on the upper part of the container. Under the action of the rear fan, the flue gas and hot air flow are separated by cyclone to collect coarse dust, and then enter the water bath dust collector. The clean gas after secondary purification treatment is discharged into the atmosphere. In areas with strict environmental protection requirements, a pulse dust collector is equipped, and the emission concentration can be controlled below 50mg.