Welcome to our websites!

Metal outdoor Electrostatic plastic powder coating paint

The working principle of electrostatic powder spraying is almost the same as that of general liquid coatings, the difference is that powder spraying is dispersed instead of atomized. It is a paint sprayed by an electrostatic powder spray gun, which makes the powder particles negatively charged while dispersing, and the charged powder particles are affected by airflow (or other forces such as centrifugal force) and electrostatic attraction. On the material, it is heated to melt and solidify to form a film. Electrostatic powder spraying is the dominant powder coating method in the industrial coating field.


Product Detail

Product Tags

About This Item

Coating Powder is a different form from general coating, it exists in the state of fine powder. Because no solvent is used, it is called coating powder. The main features of coating powder are high efficiency and resource saving. Thermosetting powder coatings are composed of thermosetting epoxy resins, polyesters, fillers, and additives. The color of the plastic powder can be determined based on the basic color card (PCF, K7...) You can send samples or plastic powder to determine the plastic powder requirements WARM TIPS:

1.Keep away from fire sources, do not direct sunlight, should be placed in a well-ventilated place with a temperature below 35 ℃.

2. Do not place in places susceptible to water, oil and other materials.

3. After powder coating is used, do not leak into the air at will, cover or tie the pocket tightly so as not to let debris mixed in.

4. Do not let the skin contact for a long time, the powder attached to the skin should be washed with soap and water, and do not use solvents.

Advantages

01 Good anti-rust performance Excellent rust resistance and water resistance Impermeability, chemical corrosion resistance, oil resistance, etc.

02 Stronger weather resistance, more durable spraying and adhesion of docking and unloading products.

03 strong adhesion Good adhesion to steel, stainless steel, aluminum alloy glass fiber reinforced plastic and other materials.

04 easier to operate Spray after pre-treatment Bake in the oven at 185 degrees for 15 minutes.

05 Weather-resistant and wear-resistant Weathering resistance, aging resistance, yellowing resistance.

06 The paint film is tough and plump The coating film has excellent mechanical High performance hardness Shock proof.

Product Dispaly

coating powder

  • Previous:
  • Next: