2022 High quality Low Temperature Polishing Additive - Resistance Flexible Graphite Ring Rroduct for Aluminium billet casting – ZheLu

Product Detail

Product Tags

Feedback (2)

The company was born in Dali, the first town of aluminum in China, which is also a famous town of non-ferrous metals in China, and has more than 1,500 aluminum enterprises so far. Low Temperature Polishing Additive, Aluminum Extrusion Press For Sale, Standard Aluminum Extrusion Profiles, Refining agent, slagging agent, magnesium ingot, silicon metal, aluminum titanium boron wire, manganese additive, chromium additive, magnesium remover.

2022 High quality Low Temperature Polishing Additive - Resistance Flexible Graphite Ring Rroduct for Aluminium billet casting – ZheLu Detail:

1.Select the hot-top casting equipment platform installation accessories of the corresponding specifications;

2.install the distribution plate, sleeve, adapter plate, distribution groove, and high-purity graphite ring on the upper side of the platform, and install the sleeve, adapter plate, and graphite ring on the mold.
On the inside, ensure clean, no damage and no gaps. It is best to use ceramic fiber paper or ceramic fiber blanket to seal the sides and bottom, which is helpful for thermal insulation.

3.After the overall hot top casting platform is installed, evenly preheat the installed standard equipment platform to 260-350 ℃, by electricity or gas. No open flame should contact the lining body of the product, Otherwise, the crack damage that occurs shall be borne by the user.

4.remove adsorbed crystal water, Make it safe and efficient use

Product detail pictures:

Related Product Guide:

The company was born in Dali, the first town of aluminum in China, which is also a famous town of non-ferrous metals in China, and has more than 1,500 aluminum enterprises so far. 2022 High quality Low Temperature Polishing Additive - Resistance Flexible Graphite Ring Rroduct for Aluminium billet casting – ZheLu , The product will supply to all over the world, such as: Argentina, Jersey, Suriname, Under the action of pressure, the heated aluminum rod is divided into several metal flows, enters the welding chamber through the shunt hole, collects in the welding chamber, and is welded again in the environment of high temperature, high pressure and high vacuum, and finally flows out through the gap between the mold core and the die hole, so as to form a pipe or hollow aluminum profile that meets the size and performance requirements, as an aluminum door and window profile or industrial aluminum profile. If bending is required, a bending tool is added to the rear device.

Alloy Extrusion